PT 2X2+F-BE

https://www.phoenixcontact.com/us/products/2839224 Surge protection base element - PT 2X2+F-BE - 2839224 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Base element for protective plug PT with protective circuit for two 2-wire floating signal circuit, gas-filled surge arrester between the connections 3-4 (GND) and 9-10, for mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm The illustration shows version PT 2x2-BE Product Features  Plugs can be checked with CHECKMASTER  Installed in conjunction with the PT 2x2...-BE base element  Maximum ease of maintenance thanks to the two-piece design  Base element remains an integral part of the installation  Consistent plug-in signal circuit protection  Protection for two separate floating signal circuits  Impedance-neutral disconnection of plug for test and maintenance purposes   Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 57.3 g Custom tariff number 85363010 Country of origin Germany Technical data Dimensions Height 89.8 mm Width 17.7 mm Depth 52 mm Horizontal pitch 1 Div. Complete module height 90 mm Complete module width 17.7 mm 12/09/2015   Page 1 / 4 https://www.phoenixcontact.com/us/products/2839224 Surge protection base element - PT 2X2+F-BE - 2839224 Technical data Dimensions Complete module depth 65.5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C Degree of protection IP20 General Flammability rating according to UL 94 V0 Color black Mounting type DIN rail: 35 mm Type DIN rail module, two-section, divisible Number of positions 4 Direction of action Signal Ground/Shield-Earth Ground Protective circuit Nominal current IN 450 mA Standby power consumption PC ≤ 1.96 VA Output voltage limitation at 1 kV/µs (Core-Earth) spike ≤ 600 V Connection data Connection method Screw connection Connection type IN Screw terminal blocks Connection type OUT Screw terminal blocks Screw thread M3 Tightening torque 0.5 Nm Stripping length 8 mm Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 12/09/2015   Page 2 / 4 https://www.phoenixcontact.com/us/products/2839224 Surge protection base element - PT 2X2+F-BE - 2839224 Classifications eCl@ss eCl@ss 5.1 27130801 eCl@ss 6.0 27130803 eCl@ss 7.0 27130803 eCl@ss 8.0 27130803 ETIM ETIM 2.0 EC000472 ETIM 3.0 EC000472 ETIM 4.0 EC000472 ETIM 5.0 EC000472 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals UL Listed / GL / EAC / EAC Ex Approvals UL Listed / cUL Listed / ATEX / cULus Listed Approvals submitted Approval details UL Listed  12/09/2015   Page 3 / 4 https://www.phoenixcontact.com/us/products/2839224 Surge protection base element - PT 2X2+F-BE - 2839224 Approvals GL  EAC  EAC  Drawings Dimensional drawing 90 51,5 65,5 44,8 The figure shows the complete module consisting of a base element and connector Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 12/09/2015   Page 4 / 4